Flame Retardant Grade Tester

It is designed to simulate the conditions of a small flame ignition source that may occur in these devices.
The machine consists of a combustion chamber with a burner at the bottom, a specimen holder, and a control panel. The specimen holder can be adjusted to hold the test material in a horizontal or vertical position, depending on the orientation of the material in the device being tested.
During the test, the specimen is exposed to a controlled flame for a specified period of time. The flame is then removed, and the specimen is observed for any signs of ignition or flame spread. The test is repeated several times with different specimens to determine the material's flammability rating.

This tester is applicable to test and assess the burning characteristics of plastic material is according to the American standard equipment and instruments parts with plastic material flammability test of relative clauses specified in the design and manufacturing, plastic parts of equipment and utensils horizontal, vertical flammability test, and equipped with gas flowmeter, adjust the flame size, adopts motor driven method, simple and safe operation.This instrument can be used to assess the flammability of materials or foam plastics such as V- 0, v-1, v-2, HB, 5V, HF- 1, HF- 2, HBF.

Test standard

fire test

GBT2408-2008: determination of plastic combustion performance and vertical method

IEC 60695-11-10 fire prevention test

Technical parameters:

Contents:≥ 0.5 cubic meter, glass observation door

Timer: the imported timer is adjustable within the range of 0 ~ 99 minutes, with a precision of plus or minus 0.1 seconds. The combustion time can be set and the combustion duration can be recorded

Casting time: 0 ~ 99 minutes 99 seconds can be set

Residual flame time: 0 ~ 99 minutes 99 seconds can be set

Afterburn time: 0 ~ 99 minutes 99 seconds can be set

Test gas: more than 98% methane /37MJ/m3 natural gas (gas also available)

Burning Angle: 20 °, 45 °, 90 ° (0 °) is adjustable

Size parameters of the burners are: imported lamp itself, nozzle Ø 9.5±0.3 mm, inner diameter nozzle effective length to 100 ± 10 mm, have air conditioning

Flame height: the standard requirement can be adjusted from 20mm to 175mm

Flow meter: adopt 105ml/min standard

Product features: other configurations include lighting fixtures, exhaust gas installations, gas flow regulating valves, gas pressure gauges, gas pressure regulating valves, gas flow meters, gas u-type pressure gauges and sample fixtures

Power supply: AC 220V, 50Hz

Machine Size:1150*650*1250mm

Weight:135KG

General model: