Expert in the application of supercritical CO2-XPS foam extrusion technology
Tel/Fax:+86-769-81272291
KARJIA
XPScare+
Longitudinal grooves on the surface of the board foam
Longitudinal grooves on the surface of the board foam
In the production process of XPS, EPS, and PET foam board, longitudinal grooves on the surface of the foam boards are a common problem. We have provided corresponding solutions for different causes.
Mold discharge port has impurities cutting the board foam:
1. Loosen the screws of the corresponding part of the die mouth to allow the residue to be carried out by the material.
2. Use a copper rod to strike the surface of the mold, causing impurities to detach from the surface and be carried out of the mold with the material.
3. Use a water gun to cool the corresponding areas of the mold surface, allowing the material to cool and harden while removing impurities.
4. Use a needle or feeler gauge to clear the mold outlet and remove impurities.
Product Service
Leave Message
Contact Us
Add:Huixing Commercial Center, Shilong Town, Dongguan City, Guangdong Province, CHINA
TEL:0086 139 2252 5034 Mr.Lin
TEL:0086 159 1691 6808 Mr.Terry
Technical service Email:
servicelin@xpscare.com
serviceterry@xpscare.com
Product consultation service Email :
info@xpscare.com
Complaint Email :complaints@xpscare.com
Tel/Fax:+86-769-81272291
Focus on the application of CO2-XPS foaming and extrusion technology,
Provide value-added service scheme for composite processing of extruded plate.